Department of Nuclear Science & Engineering (NSE)

Prof Dr. M. A. Rashid Sarkar (Late)

Professor, Department of Nuclear Science & Engineering (NSE)

 

Name: Prof Dr. M. A. Rashid Sarkar

Designation: Professor

Email:  drmarsarkar@gmail.com

 

CONTACT INFORMATION

Department of Nuclear Science and Engineering,

7th Floor, General Mustafiz Tower-2, MIST.

Mirpur Cantonment, Dhaka-1216, Bangladesh.   

 

ACADEMIC EXPERIENCE

  • Ph. D. Saints Peters burg Technical University, USSR 1984
  • M.Sc. Engineering Astrakhan State Technical University 1979
  • Advanced Degree on Energy Management 1980
  • Diploma in Teaching & Learning in higher educational Institution 1983

 


PROFESSIONAL AFFILIATIONS

  1.  

Fellow

:

Institute of Engineers, Bangladesh ( F3213)

 

  1.  

Fellow

:

Bangladesh Computer Society ( F00175)

 

  1.  

Member

:

Bangladesh Physical Society

 

  1.  

Fellow

:

NOAMI, Bangladesh

 

  1.  

Member

:

International Energy Association

 

  1.  

Member

:

Commission for Education and Communication IUCN

 

  1.  

Member

:

World council on renewable Energy (WCRE M 0160)

 

  1.  

Vice President

:

 Bangladesh Solar Energy Society (3 years)

           

 

RESEARCH INTERESTS

Research Domain: Thermal Engineering, Green power & Energy, Safety and thermal Hydraulics of Nuclear Power Reactor, Nuclear Engineering Education, Research and Personnel Training

 

PUBLICATIONS

    1. Sarkar M.A.R, Sherbakov A. Z. Heat Transfer in Liquid Cooling System of supercharged Diesel Engine. Mechanical Research Bulletin, Vol 10, p 45-58, 1987.

 

    1. Sarkar M.A.R, Sherbokov A.Z. A Comparative Study of Boiling Heat Transfer with Different

 

Heating Surface Materials presented at a conference on Modeling and Simulation held at Kiev Institute of Thermal Physics in 1984.

 

  1. Sarkar M.A.R, Sheblanob B.G. Some Laws of Forced Connective Boiling Heat Transfer in the Cooling Jacket of Internal Combustion Engines journal on Boiling and Condensation, Kiev Institute of Thermal; Physics, USSR 1986 p. 38-43.

 

  1. Sarkar M.A.R, Sherbakov A.Z. Surface boiling Heat Transfer in Cylinder Jacket of Diesel Engine Mech. Engg. Research Bulletin, BUET, Dhaka, Vol. 9, p, 57-1986

 

  1. Sarkar M.A.R,, Sherbakov A.Z. Bubble-growth Rate in Subcooled Forced Connective Boiling Heat Transfer in the Cooling jacket of Internal combustion Engine. Proceedings of the International; symposium on phase change Heat Transfer 1988 Chongqing P. R. China, P 123-128.

 

  1. Sarkar M.A.R,, A. M. A. Huq. Some aspects of Freezing Hilsha Fish in Ice-salt Mixture Journal IEB Vol. 16, No 3, p. 31-36, 1988.

 

  1. Sarkar M.A.R, Sergeev. L. V. Some Aspects of Using Emulsified Euel in a Small Diesel Engine. International Journal Archives of Thermodynamics Poland V.9. No, 2, 1992.

 

  1. Sarkar M.A.R, Mollah A. H. Powering and Propulsion of a Country Boat Journal IEB 1990, V. 18, No, 4, p 5010.

 

  1. Sarkar M.A.R, Sherbakov A. J. A mathematical model for prediction of Engine cost for Techno-economical Analysis in Designing Marine Diesel Engine Abstract of the workshop on Mathematical Modelling of Natural & Social Sciences, held at Dhaka University, 1986, Sponsored by UNESCO Regional Office.

 

  1. Sarkar M.A.R, A. M. A. Huq. Status of Heat Transfer Augmentation in Heat Exchange Equipment Paper Presented at 14th National Science Conference of BAAS at BRRI Dhaka Bangladesh.

 

  1. M.A.R Sarkar., et.al. Design & performance of an indirect free convective solar energy dryer for food dehydration. Proceedings of the 9th Miami International Congress on Energy & Environment 1989 Miami Florida, USA.

 

  1. M.A.R Sarkar., et.al. Effect of Pressure on natural convection heat transfer from an inclined cylinder Journal of the Institution of Engineers, India, vol. 74, August, 1993, p. 50-55.

 

  1. M.A.R. Sarkar, et.al. Effect of Initial temperature of loading on freezing heat transfer characteristic of some local fishes Paper presented at BAAS Conference 1992.

 

  1. M.A.R. Sarkar, et.al. Solar radiation and development of a battery charge controller for photovoltaic system Paper presented at a National Seminar, Prospects of Solar Energy in Bangladesh, held at BCSIR, Dhaka Fe. 1991.

 

 

15. M.A.R Sarkar., et.al. Solar energy research work at BUET paper presented at a on solar energy its prospects for Tropical Countries. Organized by Goethe Institute Dhaka, Bangladesh, Nov. 1992.

 

  1. M.A.R. Sarkar, et.al. Air Pollution from natural gas fueled spark ignition engine paper presented at IEB Conference, 1990.

 

  1. M.A.R Sarkar., et.al. Energy utilization scenario at a pharmaceutical industry in Bangladesh proceedings of IX ISME Conference held at University of Roorkee, India, Nov. 9-10, 1994, p. 223-229.

 

  1. M.A.R Sarkar., et al. Solar thermal energy transfer to soil paper presented at Regional Workshop on Solar Thermal and Photovoltaic Conversion and Rural Energy Planning, Dhaka, Dec. 18-23, 1993, published in the International Journal of Solar Energy.

 

  1. M.A.R Sarkar. et.al. Fuel consumption and pollution levels of automobiles in Bangladesh proceedings of the 5th International Conference on Small Engines, Their Fuels and the Environment held at Reading University, UK, April 1995.

 

  1. M.A.R., Sarkar et.al. Energy resources and renewable energy prospects in Bangladesh. proceedings of the first Jordanian Mechanical Engineering Conference held at Amman, on June 1995. P143-162

 

  1. Sarkar M.A.R Sarkar., et.al.  Energy consumption in a textile mill of Bangladesh  proceedings of

 

the first Jordanian Mechanical Engineering Conference held at Amman,  June 1995 P163-183

 

  1. MA R Sarkar Energy Usage in newsprint mills A paper published in the proceedings in renewable Energy congress Denver Colorado 1996

 

  1. Sarkar M.A.R., et.al. R.G..M. Hassan, S.M.N. Islam Solid wastes in the metropolitan city of Dhaka A paper published in the 11th International Conference on Solid Waste Technology and Management, Philadelphia, USA, 1995.p D123-135

 

  1. Sarkar M.A.R., et.al. Performance of a solar PV submersible water pumping a paper presented and published in the conference proceedings on Renewable Energy for Rural Development held at Katmandu, Nepal Oct. 1998.p186-190

 

  1. Sarkar M.A.R., et.al.  Techno-economic evaluation of a gas turbine congeneration plant, Journal

 

of the  Institution Engineers, India, vol. 79, February 1999.p 167 -171

 

26. Sarkar M.A.R., et.al. Techno-economic viability of co-generation in commercial buildings in Bangladesh published in the Journal of Energy & Environment, BUET vol. 1, November, 1999.p

 

27. Sarkar M.A.R., et.al. Pre-feasibility of co-generation in a vegetable oil refinery paper published in the proceedings of World Renewable Energy Congress 1999, Mechanical and Manufacturing Engineering, University Putra Malaysia, Malaysia.

 

  1. Sarkar M.A.R., et.al. Performance of a Stand Alone PV Home lighting system a paper presented in the WREC conference at Brighton, UK during 3-7 July, 2000.

 

  1. Sarkar M.A.R., et.al. Some Thoughts on Energy Education and Training Need in Bangladesh ISREE8,Orlando,FL USA, Aug 4-8, 2000 (http://www.fsec.ucf.edu/ed/iasee)

 

  1. M.A.R. Sarkar, et.al. Solar PV Submersible Water Pumping for Small Scale use in Bangladesh ISREE8,Orlando,FL USA, Aug 4-8, 2000 (http://www.fsec.ucf.edu/ed/iasee)

 

  1. M.A.R. Sarkar, et.al. Performance Study of A PV Operated Forced Convection Solar Energy Dryer ISREE8, Orlando,FL USA, Aug 4-8, 2002 (http://www.fsec.ucf.edu/ed/iasee)

 

  1. M.A.R. Sarkar, et.al. Rural Energy and Its Utilization in Bangladesh Energy The international Journal Elsevier Science Ltd. , Great Britain, pp 785-789, 1998

 

  1. Sarkar M.A.R. et.al. Performance Enhancement of PV modules using reflectors Journal of Energy and Environment, BUET, pp 1-7, 1999

 

  1. Sarkar M.A.R. et.al., Techno economic viability of co-generation in commercial building in Bagnladesh, Institution of Engineers, India, Calcutta, February 22-24, 2002

 

  1. Sarkar M.A.R., et.al. Energy recovery from municipal solid waste in Dhaka city, Techno-commercial aspects of Decentralized Approach in Waste to Energy, Jaipur, India March 1-3, 2002

 

  1. M.A. Hossain, B.K. Bala, R.I. Sarker and M.A.R. Sarkar Experimental investigations on equilibrium moisture contents for chilli, Journal of the Institution of Engineers, Bangladesh Agricultural Engineering Division, vol. 25/AE, No. 1, p. 94-1000, Dec. 1998.

 

37. M.A. Hossain, B.K. Bala and M.A.R. Sarkar Experimental investigation on solar drying of green chilli using tunnel drier 2nd International Seminar on Renewable Energy for Poverty Alleviation at IEB, Dhaka, Bangladesh, Nov. 26-27, 1999

 

  1. S. Mahmud, M.A.R. Sarkar and S.H. Tasnim Effect of bouncy induced multi-cellular flow on heat transfer performance in a wavy bottom solar heat collector 2nd International Seminar on Renewable Energy for Poverty Alleviation at IEB, Dhaka, Bangladesh, Nov. 26-27, 1999

 

39.

S.  Mahmud,  M.  Rahman,  M.A.R.

Sarkar    Simplified-assumption  method

for  solar  air-

 

conditioning (heating) inside a room

2nd International Seminar on Renewable Energy for Poverty

 

Alleviation at IEB, Dhaka, Bangladesh, Nov. 26-27, 1999

 

40. .A. Islam, M.A.R. Sarkar  Environmental aspects of small hydro power projects

Proceedings of

 

the Workshop on Prospects of Small Hydropower Generation in Bangladesh, Centre for Energy

 

Studies, BUET, Dhaka, May 18-19, 1998

 

 

  1. M.A.R. Sarkar, D.K. Das and M.A.T. Ali Water current turbines for pumping and electricity generation Proceedings of the Workshop on Prospects of Small Hydropower Generation in Bangladesh, Centre for Energy Studies, BUET, Dhaka, May 18-19, 1998

 

  1. M.A.R. Sarkar, et all Energy scenario in jute mills of Bangladesh A paper published in IEEE International Conference on Electricity Sector Development and Demand-side Management with

the theme Towards an Energy Efficient Society: Global Challenges, Kualalampur, Malaysia, held on Nov., 1995

 

43. M.A.R. Sarkar, M. et all Cogeneration potential in industrial and commercial sectors of Bangladesh A paper presented at the Asia-Pacific NGO Symposium on Regional Perspectives and Initiatives for Achieving a Sustainable Energy Future for All at Bali, Indonesia, 21-22 Nov. 2000

 

  1. M.A.R. Sarkar and A. Islam Environmental policy considerations and renewable energy in Bangladesh A paper presentated at the Asia-Pacific NGO Symposium on Regional Perspectives and Initiatives for Achieving a Sustainable Energy Future for All at Bali, Indonesia, 21-22 Nov. 2000

 

  1. M.A.R. Sarkar et all Power sector reforms: Bangladesh perspective A paper published in the proceedings of Second Int Conference Clean energy technologies, organized by Chiangmai University Thailand April 2003

 

  1. M.M. Alam and M.A.R. Sarkar  Appropriate wind pumping system for flood affected regions of

 

Bangladesh International Conference and Workshop on Critical Issues in Energy and Development- Challenges for the OIC Countries p. 55-70, November 2000.

 

  1. S. Papia, A.M.A. Huq, M.A.R. Sarkar and M.A.H. Mamun Heat transfer augmentation in a tube having international longitudinal inline fins interrupted in stream wise direction 4th International Conference on Mechanical Engineering (ICME2001), pp. III 159-163, December 26-28, 2001

 

  1. M A R Sarkar, M. Obaidullah, M A T Ali and A M A Huq Pre feasibility of cogeneration in a textile processing mill Mechanical Engineering Research Bulletin, vol. 1 (2001), Dept. of Mech. Engg. BIT, Chittagong, p. 6-11, 2001

 

  1. M.A. Islam, A.K. Mozumder, M.A.R. Sarkar, M. Zaman and Mahmuduzzaman Performance of a two-phase thermosyphon in Solar Water Heating IEB, Ramna, Dhaka 2003.

 

  1. A.M.A. Huq, M.A.R. Sarkar and M.N. Hyder Solar energy: An alternative solution Training Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh during Nov. 27 – Dec. 03, 1999.

 

  1. S.M.N. Islam and M.A.R. Sarkar Heat transfer to solar thermal surfaces Proceedings of the Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh during Nov. 27 – Dec. 03, 1999

 

  1. M.A.R. Sarkar, M. Obaidullah and M.A.R. Akhanda  Solar Thermal energy conversion systems

 

Proceedings of Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh Nov. 27 – Dec. 03, 1999

 

  1. M.A.R. Sarkar, M. Obaidullah, D.K. Sas and A.M.A. Huq The Possible utilization of solar thermal energy in the textile Mills in Bangladesh. proceedings of Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh during Nov. 27 – Dec. 03, 1999

 

  1. M.A. Aziz-ul Huq, M.A.R. Sarkar and M.N. Hyder Solar Photovoltaic energy conversion Proceedings of the Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh Nov. 27 – Dec. 03, 1999.

 

  1. M.A.R. Sarkar, M. Obaidullah and D.K. Das Economics of wind pumping Proceedings of Workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh held at the Centre for Energy Studies, BUET, Dhaka, Bangladesh during Nov. 27 – Dec. 03, 1999.

 

  1. M A R Sarkar M Obaidullah, Long Term Performance of solar Battery for home Lighting System A Paper presented at an Int Conference on Solar Energy for Village Power, held at Naresuan University , Thailand Nov,2002.

 

  1. M A R Sarkar Energy Efficiency in Industrial establishment: Realization of Productivity in Bangladesh, A Paper presented at Adhoc Meeting on Energy Efficiency at UN ESCAP Bangkok. Nov., 2002.

 

  1. M A R SARKAR et al   Issues Relating to Energy Conservation and Renewable Energy in

 

Bangladesh International journal on Energy for Sustainable Development Vol VII No2, June 2003.

 

  1. S Islam M A R Sarkar Prediction of Turbulent Flow Pattern in a Rib Roughened Narrow Rectangular Channel, Proceedings of the 3rd Int. Conference of Mechanical Engineers March 2003, IEB Dhaka pp 226-234 received BEST PAPER AWARD AT IEB.

 

60.

M A R SARKAR et all  Heat transfer in turbulent flow in tube with wire coil Insert  Int Journal

 

on Enhanced Heat Transfer. Pennsylvania State University vo12, No 4 2005 pp385- 394.

61.

M.A.R. Sarkar, A. M. Aziz-Ul Huq  Study of the Performance of a Black Absorber Plate with

 

Locally Available Glass Covers International Journal of  Solar Energy   1995 p38 4

 

  1. A. Motin, M.A.R. Sarkar, M. A. T. Ali Development and Accuracy Test of Computer Controlled Sensing Probe Positioning Device Paired with Data Acquisition System Proceedings of Fifth National Control Instrumentation System Conference CISCON 2008, November 7th – 8th, 2008, pp. 184-188.

 

  1. T.Hoque, A.N.M. Karim, A.F.M. A. Hoque, A.B.M. Z. Kabir and M.A.R. Sarkar Reliability and Performance of Power Distribution Network- A case Study in the City of Dhaka AT IEB INT renewable energy for Sustainable Development 2005

 

64. T. Ishtiaque, F. Ahsan, A.Raihan, M.A.R.Sarkar PASSIVE SAFETY SYSTEMS OF A MODERN NUCLEAR POWER REACTOR

 

  1. S D Saha, M. A H Shovan, M A R Sarkar FUKUSHIMA DAICHI NUCLEAR DISASTER AND ITS LESSONS TO GLOBAL COMMUNITY PHYSICS CONFERENCE 2014

 

  1. M.O.G. Miazi, L.B.Lutfar and M.A.R. Sarkar, Effect of Spindle Speed on Yarn Breakage in Production of Fine Jute Yearn

 

  1. M A R SARKAR Engineering Education for Sustainable development In Bangladesh. Ozantrik.

 

  1. M A R Sarkar Energy Efficiency in Industrial establishment: Realisation of Productivity in Bangladesh, A Paper presented at Adhoc Meeting on Energy Efficiency at UN ESCAP Bangkok. Nov., 2002

 

  1. M.F.Ismail, M.O.Reza, A.A. Rokoni, M.A.R.Sarkar, Design and Fabrication of Magnetic Separation Technique in Sand Processing ID-13, Proceedings of International Conference on Mechanical, Automotive and Aerospace Engineering,2011. Kuala Lumpur,Malaysia.(In press)

 

70. A.A. Rokoni , M.F. Ismail, M.O.Reza, M.A.R.Sarkar Development of an Image Processing Based Container Traffic Control System ID- 14, Proceedings of International Conference on Mechanical, Automotive and Aerospace Engineering,2011. Kuala Lumpur,Malaysia.(In press)

 

 

  1. M.F. Ismail, Z.M. Hasib, M.A.R. Sarkar, Fabrication of Motor Vehicle Toll-Collection System Proceedings of International Conference on System Dynamics and Control,2010. Manipal,India. P 968-973

 

72.

M.F. Ismail, Z.M. Hasib, M.O.Reza, M.A.R. Sarkar,

Extraction of Ferromagnetic Material from

 

Non-homogeneous Solid-Solid Mixture

Proceedings of Conference on Engineering Research,

 

Innovation and Education (CERIE), 2011, Sylhet, Bangladesh. P 23.

73.

Z.M. Hasib, M.F. Ismail, M.A.R. Sarkar

Automatic Highway Toll Collection Plaza: A New Step

 

To Form Digital Bangladesh   Proceedings of Bangladesh Electronic Society Conference,2010,

 

Atomic Energy Centre, Dhaka,Bangladesh.

 

74.

Z.M. Hasib, T.H. Mahdi. A. Morshed and M.A.R. Sarkar   Fabrication and Performance test of

 

solar tracking intelligence system using MATLAB

Int. engineering Conf. on hot arid regions

 

(IECHAR). 1-2 March 2010, Al-Ahsa, Kingdom of Saudi Arabia, Paper ID: 14.

75.

M.M. Rahman, Z.M. Hasib and M.A.R. Sarkar  Analysis of forced convection heat transfer over

 

a flat plate using MATLAB GUT   Control instrumentation and system conference 9CISCON-

 

2009), 6-9 November, 2009, MIT, Manipal, India. Paper ID: KR-19

       

 

  1. Z.M. HASIB m.h. Khan and M.A.R. Sarkar Study and application of adaptive control system for power plant monitoring Int. Conf. on system dynamics and control ICSDC-2010, 19-22 August 2010, MIT, India, Paper ID: SDC-411.

 

 

  1. M.F. Ismail, Z.M. Hasib, M.O. Reza and M.A.R. Sarkar  Extraction of Ferromagnetic Material

 

From Non-Homogenous Solid-solid Mixture

Conference on Engineering Research Innovation

 

and Education (CERIE-2011), 11-13 January, 2011, SUST, Sylhet, Bangladesh, PP: 23.

78.

M.Ali, M.A.R. Sarkar and Z.M. Hasib  present status of using biogas plants at Pabna district in

 

Bangladesh  Int. J. Thermal & Environmental Engineering (IJTEE), 2010

79.

T.H. Mahdi, Z.M. Hasib and M.A.R. Sarkar

Issues Relating to Dredger Selection and its

 

application in Bangladesh.  Presented at APM Civil Engineering Division IE Multidisciplinary

 

journal, IEB, Bangladesh, 2004

 

 

  1. M. A. Rashid Sarkar Study of heat transfer and pressure drop in turbulent flow through a tube with inserts, Research Project, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, (BUET), Dhaka, CASR Project No. 177, 2004.

 

81. Ahmed, M. Deju, L., Sarkar, M. A. R., and Islam, S. M. N., 2005 Heat Transfer in Turbulent Flow Through a Circular Tube With Twisted Tape Insert Proceedings of the International Conference on Mechanical Engineering (ICME), Dhaka, Bangladesh, Dec. 28–30, Paper No. TH-08.

 

 

82. Sarkar, M. A., Hasan, A. B. M. T., Ehsan, M., Talukdar, M. M. A., and Huq, A. M. A., 2005, Heat Transfer in Turbulent Flow Through With Longitudinal Strip Insert Proceedings of the International Conference on Mechanical Engineering (ICME), Dhaka, Bangladesh, Dec. 28–30, Paper No. TH-46.

 

83. Sarkar, M. A. R., Islam, M. Z., and Islam, M. A., 2005 Heat Transfer in Turbulent Flow Through Tube With Wire-Coil Inserts J. Enhanced Heat Transfer, 12_4_, pp. 385–394.

 

84.

M A R Sarkar J Uddin

Enhancement and Prediction of Heat Transfer Rate in Turbulent Flow

 

Through  Tube  With  Perforated  Twisted  Tape  Inserts:  A  New  Correlation  Journal  of  Heat

 

Transfer

Copyright

©  2011  by  ASME  APRIL  2011,  Vol.  133  /  041903-1  see

 

http://www.asme.org/terms/Terms_Use.cfm

 

 

 

 

 

 

85.

J. U. Ahamed,  M. A. R. Sarkar   Enhancement of Heat Transfer in Turbulent Flow Through A

 

tube With a Perforated Twisted Tape insert

J. Enhanced Heat Transfer Volume 18/ Issue 1,

 

2011.

 

 

 

 

 

 

86.

M.  Rizwanur

Rahman,

M.  Rabiul  Islam,  T.Ishtiaque  and

M.A.R.SarkarEXERGY  AND

 

ENERGY ANALYSIS OF THERMAL POWER PLANT

 

 

87.

S.M.K.  Hasan,  M.A.Z.  Chowdhury  and  M.A.R.  Sarkar

ISSUES  RELATING

TO  THE

 

ENHANCEMENT OF CRITICAL HEAT FLUX IN NUCLEAR REACTORS    A paper for

 

presentation for the conference on Int. Conference on nuclear power plant Advances in Nuclear

 

power plant, Paris 3-6 May 2015

 

 

 

88.

R. Mahmud, A. S. Shakil and M.A. R. Sarkar

Chernobyl Nuclear Disaster-Technical Causes

 

And Consequences  16th IMEC, IEB, Dhaka

 

 

 

89.

Kamal, M. S. Akbar, K. M. R. Rahman, D. Datta and I. Hossain and M A R Sarkar

Cooling

 

water for the proposed Rooppur nuclear power plant in Bangladesh

 

90.

Asif Reza Chowdhury, RaihanUl Islam Shezan, M.A.R. Sarkar    Nuclear Power generation:

 

economical issues. Conference of Bangladesh Economic Association, 2014.

 

 

  1. M. A. R. Sarkar, M. A. Zulquarnain, M. S. Salek, R. Akter, M. I. Khan and S. S. Nusaka Major Accidents and its Implications on Reactor Design Physics Conference

 

  1. M. K. H. Rabby, M. S. Shamim, M. A. Zulquarnain and M. A. R. Sarkar Waste Heat Recovery from Nuclear Power Plant and its use in Local Industries

 

93.

P. P. Mondal, M. M. Hasan, M. A. Zulquarnain and M. A. R. Sarkar    Causes, Effects and

 

Remedy of Gradual Degradation of Heat Exchangers used in Nuclear Power Plants  Physics

 

Conference

 

 

94.

I. Ahmed, R. Islam,

M. A. Zulquarnain and M. A. R. Sarkar

"Passive Safety Management

 

Systems in Water Cooled Nuclear Power Reactors Conference on

Physics

 

  1. R. B. Islam, R. A. Ahmed, M. A. Zulkarnain and M. A. R. Sarkar Study and Analysis of Emergency Core Cooling System of a Nuclear Reactor

 

96.

F. Ruhee, M. Islam, Z. Ahsan, M. A. R. Sarkar and   M. A. Zulquarnain  Shielding Design of a

 

Nuclear Power Reactor

 

97.

M.  R.  Rahman,  M.  Hossain,  M.  A.  Zulquarnin  and  M.  A.  R.  Sarkar

Nuclear  Safety:

 

Deterministic and Probabilistic Approach

 

98.

P. P. Mondal, M. M. Hasan, M. A. Zulquarnain and M. A. R. Sarkar. Study and

Analysis of the

 

Effect of Nuclear Radiation with Matters

 

 

99. M. L. Bari, T. Ishtiaque, K. M. Toki and M. A. R. Sarkar  Economics of Nuclear Power.

 

100.

M. A. R Sarkar, M. A. Zulquarnain, M. S. Salek,

R. Akter, M. I. Khan and S. S.

NusakThe Accident at Three Mile Island: Causes and Effects

101.

M. Hossain, T. T. Mollik, M. A. Zulquarnain and M. A. R. Sarkar   Conceptual Study and

 

Analysis of Neutron Generation, Diffusion and Moderation in Nuclear Reactor

 

  1. M. Khan, A. A. Khan, A. A. Rashid and M. A. R. Sarkar Heat Transfer Supercritical Water-Cooled Reactor (SCWR) Physics Conference

 

103.

M. A. Safiullah and M. A. Rashid Sarkar

Analysis of Two Phase Flow for Nuclear Reactor

 

Safety RUET University

 

 

 

104.

M. A. Shuvam and M. A. R. Sarker

Simulation Study and Analysis of Transient Operation of a

 

TRIGA MKII Pool Type Research Reactor

INT Conference on Physics held at BAEC

105.

M. A. Shuvam and M. A. R. Sarker   Computational Features and Simulation Capabilities of

 

RELAP5 Code for Nuclear Reactor Thermal Hydraulics and Safety Analysis   INT Conference

 

on Physics held at BAEC

 

 

 

106.

S. K. Alen and M. A. R. Sarkar

Performance of a Locally Fabricated Wireless PC  Controlled

 

SCARA Robot

The 2nd International Conference on Mechanical Engineering and Renewable

 

Energy (ICMERE-2013), 01-03 May 2014, Chittagong, Bangladesh.

107.

S. K. Alen and M. A. R. Sarkar  Fabrication and Performance of an Automatic Industrial Cooler

 

Robot

15th

Annual  Paper

Meet  (APMME-2014),  07-08  February  2014,  Mechanical

 

Engineering Division, IEB, Dhaka, Bangladesh.

108.

M. R. Rahman, S. K. Alen, Q. M. Z. Hoque and M. A. R. Sarkar  Study and Analysis of Control

 

System of a Thermal Power Plant

15th Annual Paper Meet (APMME-2014), 07-08 February

 

2014, Mechanical Engineering Division, IEB, Dhaka, Bangladesh.

109.

S. K. Alen and M. A. R. Sarkar

Commercial Energy Utilization and Prospect of the Energy

 

Sector in Bangladesh   The 11th National Conference on Industrial Problems on Machines and

 

Mechanisms (IPRoMM-2014), 26-27 February 2014,  I. T. S. Engineering College, Greater

 

Noida, India.

 

 

 

 

110.

S. K. Alen and M. A. R. Sarkar

Present Scenario and Prospect of the Power and Energy Sector

 

in Bangladesh

15th Annual Paper Meet (APMME-2014), 07-08 February 2014, Mechanical

 

Engineering Division, IEB, Dhaka, Bangladesh.

111.

S. K. Alen and M. A. R. Sarkar

Fabrication and Performance Analysis of a Fire Fighting

 

Mobile Robot

The 9th International Forum on Strategic Technology (IFOST-2014), 21-23

             

 

October 2014, Cox's Bazar, Bangladesh.

 

 

 

 

112.

S. K. Alen and M. A. R. Sarkar   Renewable Energy Resources and Technology Practices in

 

Bangladesh    International Conference on Physics for Energy and Environment, 06-08 March

 

2014, BPS, Dhaka, Bangladesh.

113.

S. A. A. Sakar, M. R. Islam, M. H. A. Nahiyan, S. K. Alen and M. A. R. Sarkar   A  Study on

 

Maintenance Management of Biomedical Equipment in the Healthcare Centres in Dhaka City

 

2nd  International  Conference  on  Medical  Physics  in  Radiation  Oncology  and  Imaging

 

(ICMPROI-2014),

 

  1. M. A. R. Sarkar, S. H. Khan, S. Saha, M. S. Islam, M. A. Khair Review Of Insert Devices As Heat Transfer Enhancement Techniques Proceedings of the 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM) 28-29 September, 2012, Dhaka, Bangladesh

 

  1. S. H. Khan, S. Saha, M. A. Rashid Sarkar Numerical investigation of heat transfer enhancement in turbulent flow through a tube with conical-ring inserts International Conference on Mechanical, Industrial and Energy Engineering 2012, 01-02 February, 2013, Khulna,

 

BANGLADESH

 

  1. S. H. Khan and M. A. Rashid Sarkar Fabrication And Performance Of A Two-Link Scara Robot Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013) 24-27 December 2013, Chittagong, Bangladesh

 

117.

S. H. Khan, M. A. Rashid Sarkar  Experimental Investigation and Prediction of Heat Transfer in

 

Turbulent

Flow

through

Tube

with

Conical

Ring

Inserts

 

International Conference on Mechanical, Industrial and Materials Engineering (ICMIME2013)

 

1-3 November, 2013, RUET, Rajshahi, Bangladesh. 20-22 August 2014, Dhaka, Bangladesh.

118.

S. Rahman, M A R Sarkar Fabrication and performance of

Exercise monitoring devices for

 

Rehabilitation of  the paralyzed 2nd International Conference on Medical Physics in Radiation

 

Oncology and Imaging (ICMPROI-2014), 20-22 August 2014, Dhaka, Bangladesh.

 

119.

M. A. R. Sarkar, S. H. Khan, S. Saha, M. S. Islam, M. A. Khair

Review Of Insert Devices As

 

Heat  Transfer

Enhancement  Techniques   Proceedings  of

the

6th  International

Mechanical

 

Engineering Conference & 14th Annual Paper Meet (6IMEC&14APM) 28-29 September, 2012,

 

Dhaka, Bangladesh

 

 

 

 

 

 

 

120.

S H Khan, S Saha, M. A. Rashid Sarkar

Numerical investigation of heat transfer enhancement

in turbulent flow through a tube with conical-ring inserts

 

  1. International Conference on Mechanical, Industrial and Energy Engineering 2012, 01-02 February, 2013, Khulna, BANGLADESH

 

  1. S. H. Khan and M. A. Rashid Sarkar Fabrication And Performance Of A Two-Link Scara Robot Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013) 24-27 December 2013, Chittagong, Bangladesh

 

123. S. H. Khan, M. A. Rashid Sarkar Experimental Investigation and Prediction of Heat Transfer in Turbulent Flow through Tube with Conical Ring Inserts International Conference on

 

Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013) 1-3 November, 2013, RUET, Rajshahi, Bangladesh.

 

  1. M A R Sarkar, Saddam Hossain Khan & Sajib Saha. heat transfer in turbulent flow through tube with conical ring inserts Euro-American Conference for Academic Disciplines, Mar 31 - Apr 3, 2014, Paris

 

  1. Review of Heat Transfer Augmentation using Delta Winglet Vortex Generators Proceedings of the 15th Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, Bangladesh,07-08 February 2014Dhaka, Bangladesh.

 

  1. S Heat Transfer Augmentation in Turbulent Flow through a Circular Tube with Delta Winglet Vortex Generators. Proceedings of the 19th Australasian Fluid Mechanics Conference, RMIT University, Melbourne, Australia, 2014 8-11Dec

 

  1. Heat Transfer Enhancement in Turbulent Flow through a Circular Tube with Various Arrangements of Delta Winglet Vortex Generator. Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, TFESC, August 9-12, 2015, New York City, USA, TFESC-12990.

 

128.

T.  Ishtiaque,  F.  Ahsan,  A.  Raihan,.

M.

A.  Sarkar

Safety

of  a

Nuclear  Power  Reactor:

 

Challenges  and  Alternatives

The

23rd

International  Conference

on

Nuclear

Engineering,

 

ICONE-23, Shiba, Japan 2015

 

 

 

 

 

 

 

 

129.

S.M.K.  Hasan,  M.A.Z.  Chowdhury

and

M.A.R.  Sarkar

Review

of  Issues

Relating  to

 

Enhancement of Critical Heat Flux in Nuclear Reactors Proceedings of International Conference

 

on Progress of Nuclear Power Plant ( ICAPP 2015) May 03-06, 2015 - Nice (France)

130.

S.B.  Mujib,  M.A.R.  Sarkar,  M.A.  Zulquarnain

General  Design  Criteria  and  Safety  of

 

Pressurized Water Reactors

The

23rd

International Conference

on

Nuclear

Engineering,

 

ICONE-23, Chiba, Japan 2015

 

 

 

 

 

 

 

 

131.

T A Farid K M Taqee T Ishtiaque M A R SARKAR

Numerical Simulation of Heat Transfer

 

and Fluid Flow in Fuel Rod Sub-Channels of  Pressurised Water

Reactors

A paper for

 

Presentation First Thermal and Fluid Engineering Coference August 9-12 2015 New York City

 

USA

 

 

 

 

 

 

 

 

132.

M. A. Safiullah1, Shaon Barua1, Tanvir Rahman1, M. A. R Sarkar2

Analysis of Two Phase

 

Flow for Nuclear Reactor Safety

International Conference on Mechanical, Industrial and

 

Materials  Engineering  2015  (ICMIME2015)  11-13  December,  2015,  RUET,  Rajshahi,

 

Bangladesh.

 

 

 

 

 

 

 

 

133.

M. A. Safiullah1, M. A. R Sarkar

Operating Parameter Correlations for Critical Heat Flux

(CHF) Prediction in Nuclear Reactor Design International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015) 11-13 December, 2015, RUET, Rajshahi, Bangladesh.

 

  1. Imran Khan Prodip. Abid Hossain Khan and. M A R Sarkar " Development of a Prosthetic Hand Operated by EEG Brain signals and EMG muscle signals" International Conference on Mechanical, Industrial and Materials Engineering 2015 (ICMIME2015) 11-13 December, 2015, RUET, Rajshahi, Bangladesh.

 

  1. H M.A.Z. Chowdhury, M.R. Rahman, M.A.R. Sarkar Heat Transfer Enhancement in a Circular Tube in Fully Developed Turbulent Flow Using Delta Winglet Vortex Generators The 9th

International Forum on Strategic Technology (IFOST-2014), 21-23 October 2014, Cox's Bazar, Bangladesh.

 

  1. C.M.Shahariar .A.Ahmed. M.A.Rashid Sarkar, Energy Cooperation in South Asia :Prospects and Challenges. Bangladesh Journal of Political Economy. Vol. 28,No1 2012 pp111-133.

 

  1. C.M. Shahariar A. Ahmed. M.A.Rashid Sarkar Energy Subsidy and Sustainable Development in Bangladesh. Bangladesh Journal of Political Economy. Vol. 28,No1 2012 pp 213-225.

 

  1. Samanta S M A R SARKAR Prospects and Challenges of Industrializations in Bangladesh The Nineteenth Biennial conference of Bangladesh Economic Association held on 08-10 January,2015

 

139. T Ishtiaque F Ahsan M A R SARKAR Energy Sector Development and Energy Security in Bangladesh The Nineteenth Biennial conference of Bangladesh Economic Association held on

 

08-10 January,2015

 

  1. A R Choudhury R U Shezan The Prospect of Nuclear Power in Bangladesh The Nineteenth Biennial conference of Bangladesh Economic Association held on 08-10 January,2015

 

  1. ANMG Mortuza A N Pulok, Samanta M.A.R. SARKAR Prospects and Challenges of Industrialization in Bangladesh The Nineteenth Biennial conference of Bangladesh Economic Association held on 08-10 January,2015

 

142.

S. Samanta  AN MG MORTUZA M A Rashid  SARKAR  Challenges of SMEs in Bangladesh

 

The  Ninteenth  Biennial  conference  of  Bangladesh  Economic  Association  held  on  08-10

 

January,2015

143.

M J A Khan1   M R Imam1, J Uddin1    M. A. Rashid Sarkar   Automated Fire Fighting System

 

withSmokeandTemperatureDetection,IEEEExploreDigitalLibrary.

 

http:/IEEEXplore.ieee.0rg, Int. Conference on Electrical and Computer, EEE, dept, BUET

 

    1. Study of Heat Transfer Enhancement in Turbulent Flow Through a Circular Tube Using Longitudinal Insert with Alternating Rectangular Winglets

 

 

 

Books Published

 

    1. Cogeneration in Industrial and Commercial Sectors of Bangladesh, ISBN 984-31-0783

 

    1. Sustainable Development in Bangladesh. 2001

 

    1. Training Materials on Renewable Energy Education and Application for Rural Communities in Bangladesh, ISBN-984-31-0784-5

 

 

SUBJECTS TAUGHT

Theory

Sessional

Automation, Robotics and Control

Nuclear Accidents  Analysis and Disaster Management

Engineering of Nuclear Power Systems

Nuclear Power Plant Engineering

Reactor Instrumentation and Control   

Introduction to Thermal Engineering

 

 

 

Other Courses offered

 

Undergraduate courses

 

  • Introduction to Mechanical Engineering

 

  • Engineering Thermodynamics

 

  • Heat and Mass Transfer

 

  • Thermo-fluid Engineering

 

  • Applied Thermodynamics

 

  • Power Plant Engineering

 

  • Instrumentation ,Control & measurement

 

  • Production Technology and Management

 

  • Renewable Energy

 

  • Cleaner production and Energy Efficiency Assessment

 

  • Information technology and management

 

  • Energy resources and its management

 

  • Industrial Management

 

  • Professional Ethics

 

  • Introduction to Nuclear Engineering

 

  • Fundamentals of Thermal Hydraulics and Safety of Nuclear Reactor

 

  • Nuclear Power Plant Engineering

 

Postgraduate courses

 

  • Advanced Heat Transfer

 

  • Design of Heat Transfer Equipment

 

  • Boiling and condensation Heat Transfer

 

  • Classical Thermodynamics

 

  • Advanced Convection Heat Transfer

 

  • Solar Energy

 

  • Heat transfer Enhancement Technique

 

  • Advanced Thermal Hydraulics and Safety of Nuclear Power Reactor

Professional Courses Organized and Offered as Resource Person

 

    • Short course on Applied Energy Saving Technologies for Industrial, Commercial and Residential Sectors, Organized for the 2nd time through BRTC, BUET, 28 April - 1 May, 2005.

 

    • Short course on Applied Energy Saving Technologies for Industrial, Commercial and Residential Sectors, Organized BRTC, BUET, 25-27 Nov., 2004.

 

    • National training program on Practical Training for Energy Managers from Industry, with the financial support of UN-ESCAP, Bangkok, 28-30 June 2002.

 

    • National training workshop on Renewable Energy Application for Rural Areas of Bangladesh, with the financial support of UNESCO, New Delhi, 18-24 Aug. 2001.

 

    • Training workshop on Renewable Energy Education and Application for Rural Communities in Bangladesh, with the financial support of UNESCO, New Delhi, 27 Nov.- 3 Dec. 1999.

 

    • International short course on Small Hydro Power, Jointly organized with the Alternate Hydro Energy Centre, University of Roorkee, India, with the financial support of Windrock International, USAID, New Delhi and ICIMOD, Nepal, 6-9 May, 1999.

 

    • Workshop on Prospects of Small Hydropower Generation in Bangladesh, 6-9,1998.

 

    • National seminar on Renewable Energy for Rural Development, Jointly organized with the IEB, Dhaka Centre, 18-19 May 1998.

 

    • Workshop on Wind and Solar Energy Application for Rural Development, Jointly organized BCSIR, 4-6 Mar. 1997.

 

    • International Symposium on Electrical Energy Systems (ISEES'93), jointly organized with Virginia Polytechnic Institute and State University (VPI & SU) of USA, with the financial support from US National Science Foundation, 13-15 Dec, 1993.

 

    • Workshop on Industrial Energy Efficiency, in collaboration with EMDC, IK., 17-18 Jul., 1993.

 

    • The Public Procurement Management in Bangladesh

 

    • Total Quality Management in (TQM) in Business and industries in Bangladesh

 

    • Short Course on Biomedical Instrumentation

 

    • Teachers' Appreciation Workshop

 

    • Short course on Nuclear Power Engineering

 

    • Short course on Nuclear Thermal Hydraulics

Supervised M.Sc./Thesis

 

       Naher Nazmoon effects of evaporator geometry and working fluids on the performance of a two-phase loop thermosyphon, M. Sc. Engineering, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, (BUET), Dhaka, CASR project # 211, 2008.

 

  • Bhuiyan M. M. Kamal an experimental study of heat transfer in turbulent flow through a tube with perforated rectangular strip insert, M. Sc. Engineering, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, (BUET), Dhaka, CASR project # 208, 2008.

 

       Ahamed J. Uddin Heat Transfer in Turbulent Flow Through Tube With Porous Twisted Tape Insert, M. Sc. Engineering, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, (BUET), Dhaka 2006

 

    • Islam Md. Zaidul Study Of Heat Transfer in Turbulent Flow Through A Tube With Wire-Coil-Inserts, M. Sc. Engineering, Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, (BUET), Dhaka, CASR project # 176, 2004.

 

    • Study of the Effects of Pressure on Natural Convention Heat Transfer from an Inclined Cylinder Placed in an Inert Atmosphere (M.Sc. In Engg.

 

    • Natural Convection Heat Transfer in a Vertical Enclosure with Multiple Partitions

 

    • Natural Convection Heat Transfer Over Finned Cylinders.

 

    • Natural Convection Heat Transfer in an Array of Horizontal Cylinders

 

    • Design and Performance of a Plane Heat Exchanger

 

    • Heat Transfer in a Rotary Cylinder

 

    • Design and Performance of a Vortex Tube

 

    • Energy Conservation Opportunities In 210 MW Gas-Fired Thermal Power Plant

 

    • A Computer Programme For Fuel Saving Alternatives of a Fishing Vessel in the Bay of Bengal

 

    • Techno-Economic Analysis of Using Family size Biogas plant in Bangladesh

 

 

Supervised M.Sc. Engg. Thesis on Sustainable Energy Engineering/Renewable Energy (Germany, Sweden)

 

    • Z. Mahmud, ‘Solar PV submersible water pumping for small scale use in Bangladesh’, Royal Institute of Technology, Sweden, 1998

 

    • Forhad Alam, ‘Performance study of a solar lantern’ University of Flensburg, Germany, 1999

    • Md. Jahangir Alam, ‘Energy recovery from municipal solid wastes in Dhaka City,

University of Flensburg, Germany, 2001

 

    • M. M. Haque, ‘Photovolataic water pumping system for irrigation’, University of

Oldenburg, Germany, 2001

 

    • M. Obaidullah, ‘Design, performance and economic analysis of a stand alone PV system, Royal Institute of Technology, Sweden, 2002

 

    • Ratan Kumar Gosh, ‘Use of cooked vegetable oil as fuel for internal combustion engine’ University of Applied Sciences, Cologne, Germany, 2002

 

    • M Monsof Ali The use and status of Biogas Plants of Pabna District in Bangladesh" University of Flensburg, Germany, 2005

 

    • The Potential of Electricity Generation from Poultry wastes in Bangladesh Munich University Germany, 2006.

 

    • Socio Economic Analysis of Using Solar PV System Rural Areas in Bangladesh University of Flensburg, 2007.

 

Worked as an External Examiner of the following M.Sc. Engg./ Thesis

 

    • Study of Dynamic Modeling and Stability of a Passenger’s Car M Engg Thesis Of

RMIT AUSTALIA October, 2006.

 

    • Development of life prediction Model for Rolling Contact wear in Ceramic and Steel Ball Bearings

 

    • Heat Transfer in an Asymmetrically Cooled Rectangular Enclosure

 

    • Natural Convection Heat transfer in an Enclosure with Multiple Vertical Partitions.

 

    • Natural Convection Heat transfer from a Triangular Finned array

 

    • Impingement Heat Transfer due to Circular Air Jet Over Rough Flat Surface, Md. Golam Kader a masters student of Mechanical Engineering Department of Bangladesh Institute of Technology, Khulna.

 

    • Improvement of Fibre and Yarn Quality of Low Grade Jute with Application of Enzymes (M.Sc. In Engg.)

 

    • Study of the Effects of Pressure on Natural Convention Heat Transfer from an Inclined Cylinder Placed in an Inert Atmosphere (M.Sc. In Engg.)

 

 

Ph.D. thesis

 

    • Supervised the Ph.D. thesis of Mr. Osman Gani Miazi ‘Optimization of Machine Parameters for Production of Fine jute yarn’.

 

    • Ongoing Ph.D Thesis on Heat Transfer enhancement in Turbulent Flow

 

    • Supervising a Ph.D. thesis on Forced Convection Heat Transfer in a Tube with Perforated Insert at BUET

 

Worked as a member of Doctoral (Ph.D.) Committee and Examination Board of the following Ph.D. Thesis

 

    • Investigation and Analysis of Wind Pumping System for Irrigation in Bangladesh

 

 

 

 

Experimental Investigation and Design Analysis of A HAWT with Circular Arc Blade Section, Mech. Engg. Deptt., BUET.

 

 
    • Experimental Study of the flow in a Circular Swirling Jet, BUET.

 

    • Forced Convection Solar Drying of Chilli Bangladesh Agricultural University, Mymensingh.

 

    • A Study on Evaluation of Flexibility in a Flexible Manufacturing System Sambalpur University, Orissa, India.
    • Study on Forced Convection Heat Transfer in Triangular, Trapezoidal and Saw Tooth forward types Ribbed Wall at Mech. Engg. Dept., BUET.

 

    • Forced Convection Heat Transfer in Ribbed Roughened Square Duct Mech. Engg. Depart, BUET.

 

    • A study on the Effect of Processing parameters of the spinning Machine on the physical properties of Jute yarn, Jahangir Nagar University, Bangladesh.

 

Worked as external examiner of Ph.D Thesis from India

 

    • Evaluation of the Ph.D. Thesis on "Progamia Pinnata based Bio-diesel and Biogas for Energy Efficiency and Environmental Control" by Mr. K. Suresh Kumar, Anna University, Chennai, India.

 

    • Examiner a Ph.D. Thesis of Syed Masum Ahmed Chowdhury  of the Department of

 

Industrial & Production Engineering, BUET, Thesis title: “Study of the Effects of Minimum Quantity Lubricants on Turning Steel using Uncoated carbide inserts”.

      • Examiner a Ph.D. Thesis of Sultana Parveen of the Department of Industrial &

 

Production Engineering, BUET, Thesis title: “Meta-Heuristic Approach to Supply Chain Optimization in an Integrated Hierarchical Production Planning System”

 

      • Examiner a Ph.D. Thesis of B. Selvakumar of the Department of Physics, Bharathiar University, Coimbatore 641 046, Tamilnadu, India. Thesis title: “The individual Performance of Single Slope, Pyramid and Parabolic Solar Stills with two Systems- Flat Plate Collector and Shallow Solar Pond”.

 

 

 

PROFESSIONAL EXPERIENCE

  • FACULTY MEMBER, Department of NSE, Military Institute of Science and Technology (MIST), Mirpur Cantonment, Dhaka-1216, Bangladesh.
    Duration: July, 2018 – Present.

     
  • Research Associates:     Performance of Diesel Engine Using Majut-Water Emulsion as Fuel, State Budget Project USSR, 1983-1985
  • Assistant Professor, Department of Mechanical Engineering, BUET: November, 1985 to March, 1991
  • Associate Professor, Department of Mechanical Engineering, BUET : April 1991 to July 1996
  • Professor, Department of Mechanical Engineering, BUET : August 1996 to 2016
  • Head, Department of Mechanical Engineering, BUET : February, 1999 to January, 2001

 

Additional Responsibility

Director

:     Institute of Nuclear Power Engineering, BUET March 2016 till

 

 

to date

Director

:

Centre for Energy Studies, BUET, 1997 - 2001

Director

:

Directorate of Continuing Education BUET, 2007 - 2009

Director

:     Research and Extension services, BUET, 2009 - 2011

Dean

:

Faulty of Mechanical engineering April 2007 -2009

Editor (Founder)

:

Journal of Energy and Environment, Published by Centre

 

 

for Energy Studies, BUET, Dhaka.

Member

:

Editorial Board, journal of Mechanical Engineering

 

 

Research & Development Published by Mechanical

 

 

Engineering Dept BUET

Member

:

International Advisory Committee of the Journal of

 

 

Mechanical Engineering, Published by University of

 

 

Jordan, Amman.

Reviewer

:

Journal of Manufacturing Engineering Institution of

 

 

Engineers, INDIA

Reviewer

:      Annals of Nuclear Engineering-Journal Elsever

Member

 

Editorial Board International journal on Engineering &

 

 

Mechanics International Publication House, Delhi, India

Member

:

Academic Council, BUET, Jessore university of Science and

 

 

Technology

Member

:

Board of Governors, Bangladesh Institute of Management,

 

 

NOAMI  etc

Member

:

Academic Council, IUT, Gazipur.

Member

:

Committee for Advanced Studies and Research (CASR), BUET

Director

:

Directorate of Advisory, Extension and Research Services

 

 

(DAERS), BUET, Dhaka.

Expert Member

:

Research Project Evaluation Committee, BCSIR, BJRI, UGC etc.

Advisor

:

Young Scientist Project of Science Museum and received National Award 1995

Expert Member

:

Course Curricula of the Technical Universities, University Grants Commission, Dhaka.

Expert Member

:

Research Grant, Physical sciences, Ministry of Science & Information and Communication Technology, Government of the People’s Republic of Bangladesh.

 

Other Experiences

 

  • Worked as member of International Advisory Committee of the International Conference on Renewable Energy Technology for Rural Development (RETRUD’98) held at Katmandu, 1998.

 

  • Working as member of course Curricula of Master of science on Renewable Energy of Centre for Energy Studies, Tribhubon University Katmandu, Nepal

 

  • Worked as member of the Organizing committee of the World Renewable Energy Congress held at Kuala Lumpur, Malaysia, June 1999

 

  • Worked as Secretary Technical Committee of a national seminar on Renewable Energy for Poverty Alleviation in 1997

 

  • Working as a member of National Committee on Promotion of Renewable Energy Technologies in Bangladesh

 

  • Worked as a secretary Technical Committee of an International seminar on Renewable

 

Energy for Poverty Alleviation held at Dhaka in Nov. 1999 organised by The institution of Engineers, Bangladesh

 

    • Working as a advisor of German based NGO Annando in promoting Renewable Energy Technology in Bangladesh.

 

    • Working as member of Task Forces on Alternative energy of the Federation of Engineering Institutions of South and Central Asia (FEISCA) from 2003 – 2005.

 

    • Working as member of National Board of Boiler, Ministry of Industries, Govt Of Bangladesh

 

    • Worked as member of M Sc course curriculum committee in Textile Engineering of Textile college Dhaka

 

    • Worked as member Course Restructuring committee BSc in Textile Engineering Dhaka Bangladesh

 

    • Worked as member Selection Board at Public Service Commission (PSC) for recruitment of Engineers

 

    • Working as member Selection Board at CUET, DUET, RUET, KUET, SUST, BTU, MBTUST, Tangail.

 

    • National Co ordinator : Erasmus Mundus Higher Education Link program

 

 

Nuclear Education Related Experiences

 

      • During Ph D program Undertook special comprehensive course on” Nuclear Thermal Hydraulics and Two phase Flow” offered by Nuclear Engineering Dept, Leningrad

Polytechnic University in1981

 

      • Attended short course on ‘Boiling heat transfer and Safety in nuclear Reactor’, Moscow power institute in 1982

 

      • Technical visit to Novo-Voronez Nuclear power plant in June 2015.

 

      • Training in a Full scope NPP Simulator at Novo-Voronez Nuclear power in June 2015

 

      Laboratory visit and training at atomic power station dept., Moscow Power University 2014

 

  • Visiting Fellow, Moscow National nuclear research University (MEPHI) 2015

 

  • Design of Course Curriculum for Post graduate studies on Nuclear Engineering at

 

INPE, BUET

 

  • Visiting fellow, Nuclear Engineering Department University of Milano, Italy 2014

 

  • Visiting fellow, Catalonia University, Nuclear Engineering Dept, Spain 2014

    • Nuclear Engineering study facility at Nuclear Engineering Dept, Marie Curie University, Paris 2014

 

    • Offering courses on nuclear engineering to BUET students

 

    • Guiding/guided thesis and projects on nuclear power engineering

 

    • Actively participated and  presented paper on ATOMEXPO June 2015

 

    • Visiting Fellow at Korea Advance Institute of Science & Technology (KAIST) Nuclear Laboratory in 2016

 

    • Visiting Fellow at Korea Atomic Energy Research Institute (KAERI), South KOREA 2016

 

    • Special training Full scope NPP Simulator at Daejon, South Korea

 

    • Visiting Fellow KOREA Institute of Nuclear Safety, South Korea

 

 

 

Research

 

    • Design Basis Accident Analysis of Pressurized Water Nuclear Power Reactor

 

    • Shielding Design for 1200-MW VVER Nuclear Power Reactor

 

    • Study of Thermal Hydraulics in the Sub-channel of Pressurized Water

 

    • General Design Criteria of Nuclear Reactors and Safety Features of Pressurized Water Reactors

 

    • Reactor Technology Assessment and Selection of Nuclear Reactor for Power Generation in Bangladesh

 

    • Analysis of Possible Causes in  Fukushima and Chernobil Nuclear Accidents

 

    • Thermal Hydraulics Analysis of High Temperature Gas-Cooled Nuclear Reactor

 

    • Simulation of Steam Generator Tube Rupture Accident in a Pressurized Water Reactor

 

    • Operating Parameters Correlations for CHF Predictions in Reactor Design

 

    • Reactor technology Assessment and selection of a power reactor for electricity generation in Bangladesh

 

    • Transient heat and fluid flow in thermal hydraulic Sub-channel of a pressurized water Nuclear Power reactor

 

    • General Design criteria and safety of a pressurized water reactors

 

    • Analysis of Main Steam Line Break Accident in VVER-1000 Nuclear Reactor, Md. A. A. Ibn Samad, D. Shome, Md. A. M. Abdullah, A. Hoque and M.A.R Sarkar at 2nd INTERNATIONAL BOSE CONFERENCE-2015, Dhaka, Bangladesh.

 

    • Simulation of Steam Generator Tube Rupture Accident in a Pressurized Water Reactor, D. Shome and M.A.R. Sarkar (accepted at 2018 International Congress on Advances in Nuclear Power Plants (ICAPP 18)

 

Coordinator of the following Joint Collaboration with BUET on Nuclear Technology

 

      • Missouri University of Science & Technology, USA

 

      • IIT Kanpur, on Nuclear Technology

 

      • Jadobpur University

 

      • University of Tenesse, USA

 

      • Oregon State University

 

 

Institute of Engineers Bangladesh (IEB) Activities

 

    • Member, Applications & Membership Committee of, IEB.

 

    • Secretary, Technical Committee of 1st,Second & third international Conference on Renewable Energy, IEB Secretary, Technical Committee 2nd International Conference on Renewable Energy 1999.

 

    • Member, AMIE Examinations Committee and Restructuring of AMIE Course Curricula and Disciplinary Committee, IEB

 

    • Member, Board of Accreditation of Engineering and Technical Education BAETE, IEB

 

    • Vice-Chairman Editorial Board, Journal of Mechanical engineering, IEB

 

    • Chairman (multiple times) Conference and Seminar Committee, Dhaka Centre, IEB.

 

    • Member, Mechanical Engineering Division and Central Council, IEB.

 

      • Involved in various activities for creating job opportunities to unemployed engineers.

 

      • Conveyor, Research Committee of the Institution of Engineers, Bangladesh

 

      • Chairman, Mechanical Engineering Division 2012-2014, organized seminars symposium in headquarter Dhaka and in the various centres and sub-centres of IEB

 

      • Promoter, University – Industry Alliance in Bangladesh